海洋环境设备涂层老化和失效的影响因素研究

目的 研究海洋设备涂层老化和失效的影响因素。方法 选择现有海洋设备涂层进行户外暴露试验和实验室加速环境试验,分析防护涂层的失光度和色差变化规律。结果 在实验室条件下成功模拟了加速海洋环境中的涂料老化,加速试验结果与户外暴露结果相关性较高。在海洋自然环境下暴露6个月后,涂层失光率降低,暴露18个月后出现粉化。结论 利用紫外光老化和盐雾试验,设定合适的环境试验参数后,实验室加速环境试验可代替户外暴露试验,缩短试验周期。涂层的配套设计、涂敷的基材结构形状、涂层施工过程等因素可直接影响涂料的老化、失效,进而引起基体腐蚀。     

典型工业源VOCs治理现状及排放组成特征

基于长三角典型城市大气VOCs排放清单识别的8个VOCs主要排放行业,选择11家代表性企业,实测研究了VOCs治理装置、排放现状、排放组成特征,并计算相关行业排放的臭氧生成潜势.结果表明,不同净化技术对非甲烷总烃(NMHC)的去除效率差异大,存在净化后浓度增加的现象,目前的环保装置对废气的处理有待优化.本次采样的大部分企业存在NMHC、苯、甲苯、二甲苯超标现象,其中甲苯的超标情况最严重.对于筛选的8个主要行业,芳香烃和含氧VOCs,是最主要的排放化合物,芳香烃是对臭氧生成贡献最大的化合物.在不同行业中,VOCs组成存在显著差异,因此在制定VOCs减排控制措施时,应优先减排对臭氧生成贡献大的行业.     

基于灰色理论的电子装备环境适应性评判模型

环境适应性是电子装备综合性能的一项重要指标。根据环境因素对电子装备的影响,构建电子装备环境适应性评价指标体系,在此基础上,运用灰色理论,建立电子装备环境适应性灰色综合评判模型,并结合实例,验证了模型的合理性和可行性。     

后勤保障电子装备地下环境适应性研究

电子设备地下环境适应性分析是后勤保障装备研究的重要内容。在分析总结地下环境特性及电子装备材料与结构特点的基础上,研究了电子装备的各类环境效应,得出其环境适应性特点。结合后勤保障电子装备在地下环境实际应用中存在的问题,提出了几项改进措施,为下一代后勤保障电子装备地下环境适应性设计给出指导性意见。     

机载设备的噪声环境试验研究

介绍了标准中所规定的试验载荷的计算方法,2种噪声试验装置——高声强混响室和高声强行波管,以及高声强试验系统和测试系统的组成。以GJB 150．86—17的图1声谱为基准,开展了机载设备的噪声环境试验研究,对噪声试验中试验夹具的设计和制造、试验样品的安装、试验前的检查和试验程序进行了说明,采用了开环和闭环方式控制声场,试验结果达到了国军标的要求。     

石油装备制造企业员工“三违”行为分析与防范措施探讨

阐述了石油装备制造企业员工"三违"行为的5种类型及其实质、表现形式、易发人群,并提出了具体的防范措施,可为石油装备制造企业有效制止员工违章行为提供借鉴。     

环境检测机构的仪器设备管理

仪器设备管理工作是非常重要的基础性工作,只有实施从购置、验收、量值溯源、使用、维护、修理、报废等具体、规范、有效的管理,才能确保环境检测机构检测结果的准确可靠。     

氧化沟中微孔曝气器的技术特性分析

曝气设备是氧化沟污水处理系统中最主要的设备,本文分析了微孔曝气的技术性能,及其在氧化沟中的特性分析和工程应用。     

常减压装置自燃危险分析及对策

通过对常减压装置内介质温度和自燃点的比较分析,绘制装置自燃危险分析图,确定自燃危险的重点防护区,并提出对策措施。     

A methodology for assessment of long-term exposure to whole-body vibrations in vehicle drivers to propose preventive safety measures

Introduction: The appearance of musculoskeletal disorders (MDs) in professional drivers due to exposition to whole-body vibration (WBV) makes it relevant to assess this exposure. The European Directive 2002/44/EC has two methods to evaluate exposure to WBV (defined in ISO2631-1:2008). These methods evaluate the exposure associated with an 8-hour working day; however, MDs due to WBV could also be caused by accumulated exposure to vibrations over long term, and hence, the methods defined in the European directive may be limited in their ability to ensure the safety of workers exposed to WBV throughout their years of employment. Method: A detailed comparison and discussion of methods defined in the European Directive and the ISO2631-5:2018 was used as a starting point of the main results of this paper. On this basis, a new methodology for the management and organization of preventive measures is proposed to consider the assessment of ISO2631-5:2018 standard and the full working life of workers. Experimental data to assess exposure to WBV in heavy equipment vehicle (HEV) drivers under different road surface conditions and range of velocities were considered to illustrate the process of the proposed methodology. Results: The methods defined in the standards provide different assessments leading to a different possible consideration of safe operations when the risks associated with them may actually be high. The proposed methodology can be used with the aim of ensuring safety of workers throughout their working lives and providing an easy implementation of the calculations of ISO2631-5:2018 standard. Conclusions: A procedure to assess the health risk probability to which the HEV worker is exposed in terms of the exposure years and a different range of operational vehicle speeds is proposed and exemplified with a study case. Practical applications: This study provides a practical tool for the management of WBV exposure related to work-tasks in HEV drivers. Safety managers should consider the global exposition to WBV throughout their working life, and this research provides an easy tool to accomplish it.